Home > Support > Update Firmware


Download latest KRMU firmware here.

How to find your firmware version.


NOTE: Once the firmware update is complete your wireless network will be:

  • Kibosh Router & Mini: krn600 and the password to join is abcd0001.

How to update your Kibosh Router Management Utility (KRMU)


Work time approx 5 - 15 min.

  1. Download the latest KRMU firmware to your PC
  2. Log into your router at http://192.168.10.1
  3. Go to System > Update Firmware
    • Select the firmware you just downloaded
    • Do not try to preserve settings.
    • Select Upgrade Now
    • Select OK to 'this will erase...'
    The upgrade will take no more than 5 minutes. Watch the upgrade status in your browser.
  4. After the upgrade is complete, on your PC device look for the wireless network krn600 and join this network using the password 'abcd0001'.
    • If you don't see the wireless network krn600 after 5 minutes manually power cycle the device, wait about 3 minutes, and krn600 wireless network should appear.
  5. Once connected to krn600, open a browser to http://192.168.10.1
  6. Log in with 'password'. The first time you log in you'll be presented with an account provisioning page:
    • Set a new password
    • Enter your KRMU ID: (it's labeled underneath your router)
    • KRMU Connectivity Code: (same as your KRMU ID - in all caps)
    • (optional) Enter an email address
    • Set your timezone
  7. Save Settings
  8. Go to www.info.com and do a search for abcd1234. If everything was successful you will receive a Success Kibosh Online message.




Download latest KRMU firmware here.